Opel Omega
- 1. Maintenance instruction
+ 1.1. Dashboard
1.2. Opening of the car
1.3. Rear-view mirrors
1.4. Switch of an ignition / starter
1.5. Manual transmission
1.6. Automatic transmission
1.7. Start of the engine
1.8. Release of the emergency brake
1.9. Parking of the car
1.10. Multipurpose display
1.11. Electronic air conditioning system
1.12. Safety locks
1.13. Lighting
1.14. Lubricants and liquids
1.15. Motive compartment
+ 1.16. Useful tips
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. System of ignition
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, half shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment
|
System of ellipsoidal forward headlights
|
|
1. Passing beam
2. Driving beam |
| PERFORMANCE ORDER |
| 1. Remove a protective cover of a headlight |
|
|
2. Disconnect the socket from the lamp basis, take out a lamp clamp from a clip and turn it outside. |
|
|
3. Push out a lamp on the holder down and take out from the reflector case. |
|
4. Disconnect the holder from the lamp basis. |
|
System of xenon forward headlights
|
|
1. Passing beam
2. Driving beam |
| PERFORMANCE ORDER |
|
|
1. Push out a lamp on the holder down and take out from the reflector case. |
| |
2. Disconnect the holder from the lamp basis. |
|
Parking lamp
Forward index of turn
Fog lights
| PERFORMANCE ORDER |
|
|
1. Weaken screws on the panel near fog lights, using the screw-driver, and remove the panel. |
| 2. Remove the screw on outer side of a fog light, turn a headlight aside and remove it. |
|
|
3. Remove a protective cover behind, having turned it. |
| 4. Disconnect the holder from a lamp socle. |
|
5. Release a latch of a lamp and turn down. |
| 6. Remove a lamp from the holder. |
|
7. Insert a new lamp so that the ledge on the holder of a lamp entered dredging in a reflector. |
|
Stoplights, indexes of turn, backing lamps, back fog lamp
| PERFORMANCE ORDER |
| |
1. Press the holder's uvula in the middle of the block of lamps aside and remove the block of lamps. |
| |
2. Press uvulas of holders of the block of lamps to each other on the right and at the left and remove the block of lamps. |
| |
3. Press a clamp uvula on the block of lamps and remove the block of lamps. |
|
Lamp of illumination of registration plate
| PERFORMANCE ORDER |
|
|
1. Press a spring clamp on one party and take out the holder of lamps, having extended it down. |
| |
2. Press a uvula on the opposite side and open the lamp case. |
|
|
3. Turn out two screws in a reverse side of the handle of a door of a back. Take out a lamp. |
|
The lamp of illumination of salon (joining when opening a door)
Lamps for reading (back)
|
|
