Opel Omega

since 1993-1999 release

Repair and operation of the car



Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. System of ignition
+ 8. Coupling
- 9. Transmissions
   + 9.1. Mechanical transmission
   - 9.2. Automatic transmission
      9.2.1. Technical characteristics
      9.2.2. Transmission liquid
      9.2.3. Gear shifting mechanism
      9.2.4. Gear shifting lever
      9.2.5. Epiploons
      9.2.6. Radiator of transmission liquid
      9.2.7. Electric elements of the control system of the transmission
      9.2.8. Automatic transmission
+ 10. Main transfer, half shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment


785173a6

9.2.2. Transmission liquid

GENERAL INFORMATION

The automatic transmission has no drain opening therefore if you need to merge transmission liquid, then for this purpose it is necessary to remove the main pallet, and if necessary and intermediate.

Discharge and filling

PERFORMANCE ORDER
1. Lift and fix a forward part of the car.
2. Unscrew an opening cap for check of level of liquid.
3. Merge liquid in suitable capacity.
4. Unscrew transmission pallet bolts. Remove the pallet and its laying.
5. Unscrew bolts of the intermediate pallet and remove it. Merge liquid in the capacity prepared for this purpose.
6. Unscrew fastening bolts (are specified by shooters).
7. Remove the transmission filter. Clean and examine the filter, if necessary replace it.
8. Carefully clean both pallets. Clean off metal particles from the magnet installed in the pallet. Clean carvings of bolts of pallets.
9. Install the filter and tighten its bolts.
10. Install the intermediate pallet together with new laying. Apply N15 10 181 sealant on carvings of bolts and tighten bolts till the necessary moment of an inhaling.
11. Install laying on the main pallet. Apply sealant on bolts. Install the pallet and tighten bolts.
12. Fill in transmission liquid of the necessary brand and check its level.
13. Pass small distance and again check liquid level.