Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. System of ignition
+ 8. Coupling
+ 9. Transmissions
- 10. Main transfer, half shafts
10.1. Technical characteristics
10.2. Main transfer
10.3. Damping plugs of the main transfer
10.4. Laying of a back cover of the main transfer
10.5. Epiploon of the leading gear wheel of the main transfer
10.6. Epiploons of bearings of half shafts
10.7. Half shaft
10.8. Boots of a half shaft and external CV JOINT
10.9. Driveshaft
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment
|
Removal
| PERFORMANCE ORDER |
| 1. Turn off bolts of fastening of a half shaft to a nave of a back wheel. |
| 2. Get a half shaft from a nave. |
| 3. Wring out a half shaft from the main transfer and remove it from the car. |
|
Installation
| PERFORMANCE ORDER |
| 1. Installation is carried out to the sequences, the return to removal. |
|
2. Tighten fixing bolts of a half shaft till the required inhaling moment. |
|
3. Tighten bolts on the required corner. |
|
|
|
