Opel Omega

since 1993-1999 release

Repair and operation of the car



Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. System of ignition
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, half shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
- 13. Body
   13.1. Technical characteristics
   13.2. Maintenance and repair
   13.3. Repair of insignificant damages of a body
   13.4. Repair of considerable damages of a body
   13.5. Loops and locks
   13.6. Windshield and motionless glasses
   13.7. Bumpers
   13.8. Front grille
   13.9. Cowl and basic racks
   13:10. Cowl lock rope
   13:11. Cowl lock spring
   13:12. Doors
   13:13. Internal panel of finishing of a door
   13:14. Door handles and locks
   13:15. Window regulators and glasses
   13:16. Back side glass (models with a body like Versatile person)
   13:17. Lock of the gate of the fuel tank and rope of the lock
   13:18. Trunk lid and basic racks
   13:19. Trunk lid lock elements
   13:20. Back door and basic racks
   13:21. Elements of the lock of a back door
   13:22. Elements of system of the central lock
   13:23. Elements of power windows
   13:24. External rear-view mirrors
   13:25. A windshield and the fixed glasses
   13:26. Elements of the top hatch
   13:27. External elements of a body
   13:28. Seats
   13:29. Elements of seat belts
   13:30. Internal panels of finishing
   13:31. Central console
   13:32. Glove compartment
   13:33. Dashboard
+ 14. Body electric equipment



13:15. Window regulators and glasses

WINDOW REGULATOR

Removal

PERFORMANCE ORDER
1. Lower glass approximately on 3/4.
2. Remove the internal panel of finishing of a door and a protective film.
3. Remove the internal handle of a door.
4. Remove the sensor of blow and a fixing arm.
5. Disconnect the socket of connection of a window regulator.
6. Mark the provision of fixing bolts of a guide and turn off bolts.
7. Holding glass, drill fixing rivets (are specified by shooters) a window regulator.
8. Remove window regulator levers.
9. Remove the window regulator mechanism.

Installation

PERFORMANCE ORDER
1. Installation is carried out to the sequences, the return to removal.
2. Fix a window regulator by means of new glasses.
3. On models with power windows after connection of the accumulator completely lift glass and hold the button of the regulator pressed within 5 seconds.

THE FALLING GLASS OF THE FORWARD DOOR

Removal

PERFORMANCE ORDER
1. Remove the window regulator mechanism.
2. Remove an external rear-view mirror.
3. Remove the loudspeaker.
4. Remove consolidations from the lower edge of a window.
5. Remove consolidation from a forward edge of a window.
6. Remove consolidation from a glass guide.
7. Turn off the top fixing bolt (it is specified by an arrow) directing to glasses.
8. Turn off the lower fixing bolt (it is specified by an arrow) directing to glasses.
9. Incline glass forward and remove it from a door.

Installation

PERFORMANCE ORDER
1. Installation is carried out to the sequences, the return to removal.
2. Check that the channel (it is specified by an arrow) on a back edge of glass got on a back edge of a door.
3. Check that the first line of glass got to a guide (it is specified by an arrow).
4. For adjustment of the maximum height of raising of glass the lock bolt serves.

THE FALLING GLASS OF THE BACK DOOR

Removal

PERFORMANCE ORDER
1. Remove a window regulator.
2. Remove consolidation from an internal lower edge of a window.
3. Remove consolidation from an external lower edge of a window.
4. Remove consolidation from a back edge of a window.
5. Turn off the top fixing bolt.
6. Turn off the central and lower fixing bolts (are specified by shooters).
7. Remove a glass guide.
8. Lift glass and remove it from a door.

Installation

PERFORMANCE ORDER
1. Installation is carried out to the sequences, the return to removal.
2. Check that the back edge of glass got to a guide groove (it is specified by an arrow).
3. Check that the guide (it is specified by an arrow) on a forward edge of glass got on a forward edge of a door.
4. For the maximum height of raising of glass lock bolts serve.
5. Turn off a forward lock bolt.
6. Turn off a back lock bolt.

THE FIXED GLASS OF THE BACK DOOR

Removal

PERFORMANCE ORDER
1. Remove the falling glass of a back door.
2. Remove rubber consolidation.
3. Remove glass.

Installation

Installation is carried out to the sequences, the return to removal.