Opel Omega

since 1993-1999 release

Repair and operation of the car

Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Repair of engines
   + 3.1. SOHC engines of 2,0 liters
   + 3.2. DOHC engines of 2,0 liters
   + 3.3. 2,5 and 3,0 liters engines
   + 3.4. Partition of all petrol engines
   + 3.5. 2,0 liters diesel engine
   - 3.6. 2,5 liters diesel six-cylinder engine
      3.6.1. Removal and installation of the engine
      3.6.2. Head of cylinders
      3.6.3. Cam-shaft
      3.6.4. Check of a compression
      3.6.5. Multiridge maple belt
      3.6.6. Pallet of a case and laying
      + 3.6.7. Cooling system of the diesel engine 2,5 liters
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. System of ignition
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, half shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment

3.6.5. Multiridge maple belt

Removal

PERFORMANCE ORDER

1. Remove the lower guard of a motive compartment.
	2. If is available, weaken multiridge maple a conditioner belt on a tension roller (1).
3. Remove the top guard of the engine and a pipe of the forced air.
4. Install the big screw-driver or the similar lever on a tension element.
5. Squeeze a natyazhitel of a belt and take off multiridge maple a belt.
	6. Take off multiridge maple a belt between the fan with the viscous coupling and the air diffuser.
7. At a lack of the place remove the fan.

Installation

PERFORMANCE ORDER

	1. Impose new multiridge maple a belt according to the scheme on pulleys, at the same time squeeze a belt pulley, as at removal. You watch the correct situation in grooves of pulleys.
2. Unload a tension element. Tension force is transferred from a tension element, height of a tension is not regulated.
3. Establish the top guard of the engine and a pipe of the forced air.
4. Where is available, insert multiridge maple a conditioner belt, unload a tension roller.
5. Install the fan with the viscous coupling.
6. Establish the lower guard of a motive compartment.