Opel Omega

since 1993-1999 release

Repair and operation of the car



Opel Omega
+ 1. Maintenance instruction
- 2. Maintenance
   - 2.1. Cars with petrol engines
      2.1.1. Technical characteristics
      2.1.2. Current maintenance
      + 2.1.3. Through 8000 km of a run or each 6 months
      - 2.1.4. Through 16 000 km of a run or each 12 months
         2.1.4.1. Light and alarm equipment
         2.1.4.2. Forward and back brakes
         2.1.4.3. Driving belt
         2.1.4.4. Hoses and connections
         2.1.4.5. Corrosion-resistant coating of a body
         2.1.4.6. Emergency brake
         2.1.4.7. Suspension bracket and steering
         2.1.4.8. Moments of an inhaling of bolts of fastening of wheels
         2.1.4.9. Adjustment of headlights of head light and front position lamps
         2.1.4.10. Check of the car in road conditions
         2.1.4.11. Adjustment of wheels
         2.1.4.12. System of production of the fulfilled gases
      + 2.1.5. Through 32 000 km of a run or each 2 years
      + 2.1.6. Through 64 000 km of a run or each 4 years
      + 2.1.7. Through 112 000 km of a run or each 7 years
      + 2.1.8. Each 2 years irrespective of a run
   + 2.2. Cars with diesel engines
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. System of ignition
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, half shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment


785173a6

2.1.4.2. Forward and back brakes

Check of wear of brake slips and brake disks

FORWARD BRAKES

PERFORMANCE ORDER
1. Remove forward wheels.
2. For check of a condition of brake slips, a support and a brake disk brake slips need to be removed. About thickness of brake slips can be checked through an opening in a support.
3. If thickness of any brake slip is less than minimum admissible, it is necessary to replace all four brake slips on both wheels.

BACK BRAKES

PERFORMANCE ORDER
1. Remove back wheels.
2. For check of a condition of brake slips, a support and a brake disk brake slips need to be removed. About thickness of brake slips can be checked through an opening in a support.
3. If thickness of any brake slip is less than minimum admissible, it is necessary to replace all four brake slips on both wheels.