Opel Omega

since 1993-1999 release

Repair and operation of the car



Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Repair of engines
   + 3.1. SOHC engines of 2,0 liters
   - 3.2. DOHC engines of 2,0 liters
      3.2.1. Technical characteristics
      3.2.2. Check of a compression
      3.2.3. Top Dead Point (TDP) of the N1 piston
      3.2.4. Cover of camshafts
      3.2.5. Pulley of a bent shaft
      3.2.6. Covers of a gas-distributing belt
      3.2.7. Gas-distributing belt
      3.2.8. Natyazhitel of a belt, asterisks and intermediate pulleys
      3.2.9. Epiploons of camshafts
      3.2.10. Camshafts and pushers
      3.2.11. Head of cylinders
      3.2.12. Oil pallet
      3.2.13. Oil pump
      3.2.14. System of an equilibration of a bent shaft (engines since 1998)
      3.2.15. Flywheel
      3.2.16. Epiploons of a bent shaft
      3.2.17. Fastenings of the engine and transmission
   + 3.3. 2,5 and 3,0 liters engines
   + 3.4. Partition of all petrol engines
   + 3.5. 2,0 liters diesel engine
   + 3.6. 2,5 liters diesel six-cylinder engine
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. System of ignition
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, half shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment


785173a6

3.2.17. Fastenings of the engine and transmission

Check

PERFORMANCE ORDER
1. Lift and fix a forward part of the car.
2. Examine rubber shock-absorbers of support on existence of wear and damages, if necessary replace them.
3. Check that bolts of support were strong tightened.
4. Check whether support are worn-out.

Replacement

LEFT AND RIGHT SUPPORT OF THE ENGINE

PERFORMANCE ORDER
1. Lift and fix a forward part of the car.
2. Establish a jack under the engine and the transmission or fix the engine on the elevator.
3. Twist nuts, the fixing support to an arm of the block of cylinders and a body. Remove support. If necessary remove also an arm.
4. Examine support on existence of wear and damages and, if necessary, replace them.
5. Establish support upside-down.

BACK FASTENING OF THE TRANSMISSION

PERFORMANCE ORDER
1. Lift and fix a forward part of the car.
2. Establish a jack under the transmission.
3. Unscrew the bolts fixing to a body a cross-piece of a back support of the transmission. Twist the nuts fixing a support to a cross-piece and remove a cross-piece.
4. Unscrew bolts and remove a support.
5. Examine a support on existence of wear and damages and, if necessary, replace it.
6. Establish a support in the return sequence.