Opel Omega
since 1993-1999 release
Repair and operation of the car
Opel Omega
+
1. Maintenance instruction
+
2. Maintenance
-
3. Repair of engines
-
3.1. SOHC engines of 2,0 liters
3.1.1. Technical characteristics
3.1.2. Check of a compression
3.1.3. Top Dead Point (TDP) of the N1 piston
3.1.4. Camshaft cover
3.1.5. Pulley of a bent shaft
3.1.6. Covers of a gas-distributing belt
3.1.7. Gas-distributing belt
3.1.8. Natyazhitel of a gas-distributing belt and asterisk
3.1.9. Camshaft epiploon
3.1.10. Casing of the camshaft and camshaft
3.1.11. Pushers and hydraulic elevators
3.1.12. Head of cylinders
3.1.13. Oil pallet
3.1.14. Oil pump
3.1.15. Flywheel
3.1.16. Epiploons of a bent shaft
3.1.17. Fastenings of the engine and transmission
+
3.2. DOHC engines of 2,0 liters
+
3.3. 2,5 and 3,0 liters engines
+
3.4. Partition of all petrol engines
+
3.5. 2,0 liters diesel engine
+
3.6. 2,5 liters diesel six-cylinder engine
+
4. Heating system and ventilation
+
5. Fuel, exhaust systems
+
6. System of start of the engine
+
7. System of ignition
+
8. Coupling
+
9. Transmissions
+
10. Main transfer, half shafts
+
11. Brake system
+
12. Suspension bracket and steering
+
13. Body
+
14. Body electric equipment
3.1.4. Camshaft cover
Removal
PERFORMANCE ORDER
1.
Disconnect a ventilating hose from a camshaft cover.
2.
Unscrew bolts and uncover the camshaft.
Installation
PERFORMANCE ORDER
1.
Carefully examine an internal surface of a cover and, if necessary, clean it.
2.
Establish new laying and establish a cover.
3.
Insert and tighten bolts.
4.
Connect a ventilating hose.
