Opel Omega

since 1993-1999 release

Repair and operation of the car



Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. System of ignition
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, half shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
- 14. Body electric equipment
   14.1. Technical characteristics
   14.2. Search of a source of malfunction in system of electric equipment
   14.3. Safety locks and relay
   14.4. Switches
   14.5. Bulbs (external lighting fixtures)
   14.6. Bulbs (internal lighting)
   14.7. External lighting fixtures
   14.8. Adjustment of headlights of head light
   14.9. Instrument guard
   14:10. Elements of an instrument guard
   14:11. Hours / multipurpose display
   14:12. Lighter
   14:13. System of adjustment of xenon headlights
   14:14. Horns of a sound signal
   14:15. Levers of screen wipers
   14:16. Engine, connecting mechanism of a screen wiper of a windshield
   14:17. Engine of a screen wiper of back glass
   14:18. Washers of wind glass / back glass / headlights of head light
   14:19. Radio receiver / cassette / CD player
   14:20. Loudspeakers
   14:21. Radio antenna
   14:22. System of the anticreeping alarm system and immobilizer of the engine
   14:23. System of airbags of safety
   14:24. Elements of system of airbags of safety
   14:25. System elements cruise control
   + 14:26. Schemes of electric equipment


785173a6
Душевые перегородки из HPL пластика

14:13. System of adjustment of xenon headlights

GENERAL INFORMATION

Prevention

For check of work of system of adjustment and exact adjustment of headlights it is recommended to address experts.


BULBS OF HEADLIGHTS

Cm. subsection 14.5.

SENSOR OF HEIGHT OF THE FORWARD PART OF THE CAR

Removal

PERFORMANCE ORDER
1. Remove the left wheel.
2. Disconnect the connection socket, turn off fixing bolts (are specified by shooters) and remove the sensor.
3. Turn off a fixing bolt and disconnect draft of the sensor from a forward suspension bracket.

Installation

Installation is carried out to the sequences, the return to removal.

SENSOR OF HEIGHT OF THE BACK PART OF THE CAR

The sensor is installed on the left side of a cross-piece of a back suspension bracket.

Removal

PERFORMANCE ORDER
1. Remove the left wheel.
2. Disconnect the connection socket, turn off fixing bolts (are specified by shooters) and remove the sensor.
3. Turn off a fixing bolt and disconnect draft of the sensor from a forward suspension bracket.

Installation

Installation is carried out to the sequences, the return to removal.

ELECTRONIC CONTROL UNIT

Removal

PERFORMANCE ORDER
1. Remove an insert of a niche of the right forward wheel.
2. Remove an electronic control unit from a fixing arm on the top fastening of a rack of a suspension bracket and disconnect the connection socket.

Installation

Installation is carried out to the sequences, the return to removal.

ELECTRIC DRIVE OF HEADLIGHTS

Removal

PERFORMANCE ORDER
1. Remove a headlight.
2. Turn the drive clockwise and remove it.

Installation

Installation is carried out to the sequences, the return to removal.