Opel Omega

since 1993-1999 release

Repair and operation of the car

Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. System of ignition
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, half shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
- 14. Body electric equipment
   14.1. Technical characteristics
   14.2. Search of a source of malfunction in system of electric equipment
   14.3. Safety locks and relay
   14.4. Switches
   14.5. Bulbs (external lighting fixtures)
   14.6. Bulbs (internal lighting)
   14.7. External lighting fixtures
   14.8. Adjustment of headlights of head light
   14.9. Instrument guard
   14:10. Elements of an instrument guard
   14:11. Hours / multipurpose display
   14:12. Lighter
   14:13. System of adjustment of xenon headlights
   14:14. Horns of a sound signal
   14:15. Levers of screen wipers
   14:16. Engine, connecting mechanism of a screen wiper of a windshield
   14:17. Engine of a screen wiper of back glass
   14:18. Washers of wind glass / back glass / headlights of head light
   14:19. Radio receiver / cassette / CD player
   14:20. Loudspeakers
   14:21. Radio antenna
   14:22. System of the anticreeping alarm system and immobilizer of the engine
   14:23. System of airbags of safety
   14:24. Elements of system of airbags of safety
   14:25. System elements cruise control
   + 14:26. Schemes of electric equipment


14:16. Engine, connecting mechanism of a screen wiper of a windshield


1. Remove levers of screen wipers.
2. Remove consolidation from a back wall of a motive compartment.
3. Turn off fixing screws of the water taking away panel.
4. Raise consolidation, get latches and remove the panel.
5. Remove the water taking away panel.
6. Turn off fixing screws and remove fastening of a hose.
7. Disconnect the socket of connection of the engine.
8. Turn off fixing bolts of the connecting mechanism and engine with left and on the right side.
9. Turn off fixing bolts in the center and remove the engine and the connecting mechanism.
10. Remove the engine from the connecting mechanism if it is necessary.


Installation is carried out to the sequences, the return to removal. The latch on the left side has to get to the corresponding opening (it is specified by an arrow) on an arm.