Opel Omega

since 1993-1999 release

Repair and operation of the car



Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. System of ignition
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, half shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
- 14. Body electric equipment
   14.1. Technical characteristics
   14.2. Search of a source of malfunction in system of electric equipment
   14.3. Safety locks and relay
   14.4. Switches
   14.5. Bulbs (external lighting fixtures)
   14.6. Bulbs (internal lighting)
   14.7. External lighting fixtures
   14.8. Adjustment of headlights of head light
   14.9. Instrument guard
   14:10. Elements of an instrument guard
   14:11. Hours / multipurpose display
   14:12. Lighter
   14:13. System of adjustment of xenon headlights
   14:14. Horns of a sound signal
   14:15. Levers of screen wipers
   14:16. Engine, connecting mechanism of a screen wiper of a windshield
   14:17. Engine of a screen wiper of back glass
   14:18. Washers of wind glass / back glass / headlights of head light
   14:19. Radio receiver / cassette / CD player
   14:20. Loudspeakers
   14:21. Radio antenna
   14:22. System of the anticreeping alarm system and immobilizer of the engine
   14:23. System of airbags of safety
   14:24. Elements of system of airbags of safety
   14:25. System elements cruise control
   + 14:26. Schemes of electric equipment


785173a6

14:25. System elements cruise control

DRIVE ROPE

Removal

PERFORMANCE ORDER
1. Disconnect an accelerator rope from the lever of a butterfly valve.
2. Remove a lock ring and disconnect a system rope a cruise control from the lever of a butterfly valve.
3. Remove a rope guide to a fixing arm.
4. Disconnect a rope from an electronic control unit of system and remove it.

Installation

Installation is carried out to the sequences, the return to removal.

DRIVE / ELECTRONIC CONTROL UNIT

Removal

PERFORMANCE ORDER
1. Disconnect a rope from an electronic control unit.
2. Disconnect the connection socket, turn off fixing nuts and remove the module.

Installation

Installation is carried out to the sequences, the return to removal.

THE SWITCH ON THE COUPLING PEDAL

Removal

PERFORMANCE ORDER
1. Remove the panel of finishing and air branch pipes under an instrument guard.
2. Remove a pin and the plug of the drive from the switch.
3. Wring out latches and remove the switch from a fixing arm. Disconnect the connection socket.

Installation

Installation is carried out to the sequences, the return to removal.

SWITCHES ON THE STEERING COLUMN

Cm. subsection 14.4.