Opel Omega

since 1993-1999 release

Repair and operation of the car



Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. System of ignition
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, half shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
- 14. Body electric equipment
   14.1. Technical characteristics
   14.2. Search of a source of malfunction in system of electric equipment
   14.3. Safety locks and relay
   14.4. Switches
   14.5. Bulbs (external lighting fixtures)
   14.6. Bulbs (internal lighting)
   14.7. External lighting fixtures
   14.8. Adjustment of headlights of head light
   14.9. Instrument guard
   14:10. Elements of an instrument guard
   14:11. Hours / multipurpose display
   14:12. Lighter
   14:13. System of adjustment of xenon headlights
   14:14. Horns of a sound signal
   14:15. Levers of screen wipers
   14:16. Engine, connecting mechanism of a screen wiper of a windshield
   14:17. Engine of a screen wiper of back glass
   14:18. Washers of wind glass / back glass / headlights of head light
   14:19. Radio receiver / cassette / CD player
   14:20. Loudspeakers
   14:21. Radio antenna
   14:22. System of the anticreeping alarm system and immobilizer of the engine
   14:23. System of airbags of safety
   14:24. Elements of system of airbags of safety
   14:25. System elements cruise control
   + 14:26. Schemes of electric equipment


785173a6

14.6. Bulbs (internal lighting)

GENERAL INFORMATION

Prevention

When replacing bulbs try not to touch glass of bulbs by fingers.

Be accurate not to burn.

Use bulbs of the required power.


FORWARD BULBS OF ILLUMINATION OF SALON

Replacement

PERFORMANCE ORDER
1. Remove the lens.
2. Remove the corresponding bulb.
3. Installation is carried out to the sequences, the return to removal.

BACK BULBS OF ILLUMINATION OF SALON

Replacement

PERFORMANCE ORDER
1. Remove a lamp from the finishing panel.
2. Get a bulb.
3. Installation is carried out to the sequences, the return to removal.

BULB OF ILLUMINATION OF THE LUGGAGE CARRIER

Replacement

PERFORMANCE ORDER
1. Remove a lamp from the finishing panel.
2. Remove a bulb.
3. Installation is carried out to the sequences, the return to removal.

BULB OF ILLUMINATION OF THE GLOVE COMPARTMENT

Replacement

PERFORMANCE ORDER
1. Get a lamp.
2. Remove a bulb.
3. Installation is carried out to the sequences, the return to removal.

LIGHTING BULB ON THE DOOR

Replacement

PERFORMANCE ORDER
1. Remove a lamp from a door.
2. Remove the filter.
3. Get a bulb.
4. Installation is carried out to the sequences, the return to removal.

BULBS OF ILLUMINATION OF THE INSTRUMENT GUARD

Bulbs of lighting are located in the center of an instrument guard, and alarm bulbs – in the lower part.

Replacement

PERFORMANCE ORDER
1. Remove an instrument guard.
2. Turn and get a cartridge with a bulb. Remove a bulb.
3. Installation is carried out to the sequences, the return to removal.

LIGHTING OF THE SWITCH OF HEADLIGHTS

Replacement

PERFORMANCE ORDER
1. Remove the switch.
2. Remove a cartridge from a reverse side of the switch.
3. Installation is carried out to the sequences, the return to removal.

BULB OF LIGHTING OF THE HOURS / DISPLAY

Replacement

PERFORMANCE ORDER
1. Remove an instrument guard.
2. Unscrew a cartridge with a bulb and remove a bulb.
3. Installation is carried out to the sequences, the return to removal.

BULBS OF LIGHTING OF THE PANEL OF ADJUSTMENT OF TEMPERATURE IN SALON

Replacement

PERFORMANCE ORDER
1. Remove the adjustment panel.
2. Remove the corresponding bulb from a reverse side of the panel.
3. Installation is carried out to the sequences, the return to removal.