Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Repair of engines
+ 3.1. SOHC engines of 2,0 liters
+ 3.2. DOHC engines of 2,0 liters
+ 3.3. 2,5 and 3,0 liters engines
+ 3.4. Partition of all petrol engines
- 3.5. 2,0 liters diesel engine
3.5.1. Technical characteristics
3.5.2. Repair operations on the engine installed in the car
3.5.3. Check of pressure of compression 3_5_4.htm
3.5.5. Gas distribution mechanism
3.5.6. Cover of a head of the block of cylinders
3.5.7. Pulley of a bent shaft
3.5.8. Chain cover
3.5.9. Natyazhiteli of a chain
3.5.10. Chains and asterisks
3.5.11. Camshafts and pushers
3.5.12. Head of the block of cylinders
3.5.13. Oil pallet
3.5.14. Oil pump
3.5.15. Oil heater
3.5.16. Sealing rings of a bent shaft
3.5.17. Flywheel
3.5.18. Suspension brackets of the power unit
+ 3.5.19. Capital repairs of the 2,0 liters diesel engine
+ 3.6. 2,5 liters diesel six-cylinder engine
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. System of ignition
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, half shafts
+ 11. Brake system
+ 12. Suspension bracket and steering
+ 13. Body
+ 14. Body electric equipment
|
Prevention
At installation of a flywheel it is necessary to use new bolts.
Removal
| PERFORMANCE ORDER |
| 1. Remove the transmission and coupling. |
|
2. Record a flywheel from a provorachivaniye, having established a clamp on a gear wreath of a flywheel. Apply combination tags on a flywheel and a bent shaft. |
|
3. Unscrew bolts and remove a flywheel. |
|
Check
Check a flywheel for wear from coupling and a condition of teeths of a gear wreath.
Installation
| PERFORMANCE ORDER |
| 1. Clear the interfaced surfaces of a flywheel and a bent shaft. |
| 2. Establish a flywheel according to earlier made tags and screw in new bolts of fastening of a flywheel. |
| 3. Record a flywheel from a provorachivaniye and tighten bolts of fastening of a flywheel in several stages. |
| 4. Establish coupling and the transmission. |
|
|
|
