| 1. Lower a back part of the exhaust system approximately by 300 mm. |
| 2. Disconnect the socket of connection of the sensor of height of a back suspension bracket. Mark position of the lever of the sensor and disconnect it from connecting draft of the stabilizer of cross stability. |
| 3. Disconnect a hydraulic tube from the shock-absorber if it is necessary. |
| 4. Turn off and remove bolts of the lower fastening of the shock-absorber. |
| 5. Disconnect sockets of connection of ABS sensors. |
| 6. Turn off the bolts fixing a damping arm of a cross-piece of a back suspension bracket to a body. |
| 7. Omit the main transfer, a cross-piece of a back suspension bracket and the lever of a suspension bracket and remove a spring and rubber laying. |
