Opel Omega

since 1993-1999 release

Repair and operation of the car


Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. System of ignition
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, half shafts
+ 11. Brake system
- 12. Suspension bracket and steering
   12.1. Technical characteristics
   12.2. Rack of a forward suspension bracket
   12.3. Disorder of forward wheels
   12.4. Lower lever of a forward suspension bracket
   12.5. Spherical hinge of the lower lever of a forward suspension bracket
   12.6. Stabilizer of cross stability of a forward suspension bracket
   12.7. Connecting links of the stabilizer of cross stability
   12.8. Rotary pin
   12.9. Nave and bearings of a forward wheel
   12:10. Cross-piece of a forward suspension bracket
   12:11. Shock-absorber of a back suspension bracket
   12:12. Lever of a back suspension bracket
   12:13. Springs of a back suspension bracket
   12:14. Stabilizer of cross stability of a back suspension bracket
   12:15. Cross drafts of a back suspension bracket
   12:16. System of adjustment of height of a back suspension bracket
   12:17. Back suspension bracket
   12:18. Cross-piece of a back suspension bracket
   12:19. Fastenings of a cross-piece of a back suspension bracket
   12:20. Nave and bearings of a back wheel
   12:21. Steering wheel
   12:22. Steering column
   12:23. Lock of a steering column / lock of ignition
   12:24. Steering mechanism
   12:25. Steering drafts
   12:26. Steering bipod
   12:27. Pump of system of the hydraulic booster of steering
   12:28. Adjustment of wheels and angles of turns
+ 13. Body
+ 14. Body electric equipment


785173a6 Разработка экологической документации в краснодаре смотрите на www.ab-groupe.ru.

12.2. Rack of a forward suspension bracket

Removal

PERFORMANCE ORDER
1. Remove the corresponding wheel.
2. Remove a brake support.
3. Remove a fixing clip.
4. Remove a hydraulic hose from an arm on a rack.
5. Remove the ABS sensor.
6. Turn off a fixing nut and disconnect the stabilizer of cross stability.
7. Mark the provision of installation of a rotary pin.
8. Turn off fixing bolts.
9. Remove fixing bolts and a pin.
10. Remove a cap.
11. Turn off the top fixing nut.
12. Remove a disk.
13. Hold a shock-absorber piston rod that it did not rotate.
14. Remove a rack from the car.

Repair

PERFORMANCE ORDER
1. Install compressors on a spring.
2. Fix a shock-absorber rod.
3. Remove the bearing.
4. Remove a washer.
5. Remove the bearing.
6. Remove a washer.
7. Remove the top saddle of a spring, the top damper, an emphasis and a casing.
8. Remove a spring.
9. Clear all elements and examine them on existence of wear or damages. Replace the failed elements.
10. Check operation of the shock-absorber.
11. Assembly of elements of a rack is carried out upside-down.
12. Establish a rubber damper on the lower saddle of a spring.
13. Establish a spring on the lower saddle.
14. Establish a rubber damper on the top saddle of a spring.

Installation

Installation is carried out to the sequences, the return to removal.