| 1. Disconnect a wire of the minus plug of the accumulator. |
| 2. Remove the finishing panel under the dashboard. |
|
3. Mark the provision of installation of a shaft of a steering column in relation to flexible connection, then turn off the top coupling bolt (it is specified by an arrow). |
| 4. Remove a steering wheel. |
| 5. Remove casings of a steering column. |
| 6. Remove the lock of ignition and the combined switches. |
| 7. Turn off fixing screws and remove the block of safety locks and the relay from the dashboard. |
|
8. Turn off the top fixing nut (A) and drill srezny a bolt (In). |
| 9. Remove a steering column. |
Разместить