Opel Omega
since 1993-1999 release
Repair and operation of the car
Opel Omega
+
1. Maintenance instruction
+
2. Maintenance
+
3. Repair of engines
+
4. Heating system and ventilation
+
5. Fuel, exhaust systems
+
6. System of start of the engine
+
7. System of ignition
+
8. Coupling
+
9. Transmissions
+
10. Main transfer, half shafts
+
11. Brake system
-
12. Suspension bracket and steering
12.1. Technical characteristics
12.2. Rack of a forward suspension bracket
12.3. Disorder of forward wheels
12.4. Lower lever of a forward suspension bracket
12.5. Spherical hinge of the lower lever of a forward suspension bracket
12.6. Stabilizer of cross stability of a forward suspension bracket
12.7. Connecting links of the stabilizer of cross stability
12.8. Rotary pin
12.9. Nave and bearings of a forward wheel
12:10. Cross-piece of a forward suspension bracket
12:11. Shock-absorber of a back suspension bracket
12:12. Lever of a back suspension bracket
12:13. Springs of a back suspension bracket
12:14. Stabilizer of cross stability of a back suspension bracket
12:15. Cross drafts of a back suspension bracket
12:16. System of adjustment of height of a back suspension bracket
12:17. Back suspension bracket
12:18. Cross-piece of a back suspension bracket
12:19. Fastenings of a cross-piece of a back suspension bracket
12:20. Nave and bearings of a back wheel
12:21. Steering wheel
12:22. Steering column
12:23. Lock of a steering column / lock of ignition
12:24. Steering mechanism
12:25. Steering drafts
12:26. Steering bipod
12:27. Pump of system of the hydraulic booster of steering
12:28. Adjustment of wheels and angles of turns
+
13. Body
+
14. Body electric equipment
12:23. Lock of a steering column / lock of ignition
DRUM OF THE LOCK
Removal
PERFORMANCE ORDER
1.
Remove a steering wheel.
2.
Remove the top casing of a steering column.
3.
Disconnect the socket of connection and remove an immobilizer.
4.
Insert a key into the lock of ignition and turn it in situation 1.
5.
Press on the lock button.
6.
Remove a drum of the lock.
Installation
PERFORMANCE ORDER
1.
Installation is carried out to the sequences, the return to removal.
2.
Press on a latch (it is specified by an arrow) the lock button if it is necessary.
CONTACT MODULE OF THE LOCK OF IGNITION
Removal
PERFORMANCE ORDER
1.
Remove a drum of the lock.
2.
Disconnect the connection socket
3.
Press on the lock button.
4.
Remove the contact module.
Installation
Installation is carried out to the sequences, the return to removal.
