| 1. Remove intermediate and back sections of the exhaust system. |
| 2. Remove the balance weight of ropes of the emergency brake. |
| 3. Remove supports of brakes. |
| 4. Remove ABS sensors. |
| 5. Disconnect the driveshaft from a flange of the main transfer. |
| 6. Establish a thick board under levers of a suspension bracket and establish a jack under the center of a board. |
| 7. Turn off bolts, the fixing arms of the main transfer to a body. |
| 8. Turn off bolts of the lower fastenings of shock-absorbers. |
| 9. Remove springs of a suspension bracket and laying. |
|
10. Turn off three fixing bolts (A) and the central bolt (V) of forward fastening of a cross-piece of a suspension bracket and remove a back suspension bracket. |
