Opel Omega

since 1993-1999 release

Repair and operation of the car


Opel Omega
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Repair of engines
+ 4. Heating system and ventilation
+ 5. Fuel, exhaust systems
+ 6. System of start of the engine
+ 7. System of ignition
+ 8. Coupling
+ 9. Transmissions
+ 10. Main transfer, half shafts
+ 11. Brake system
- 12. Suspension bracket and steering
   12.1. Technical characteristics
   12.2. Rack of a forward suspension bracket
   12.3. Disorder of forward wheels
   12.4. Lower lever of a forward suspension bracket
   12.5. Spherical hinge of the lower lever of a forward suspension bracket
   12.6. Stabilizer of cross stability of a forward suspension bracket
   12.7. Connecting links of the stabilizer of cross stability
   12.8. Rotary pin
   12.9. Nave and bearings of a forward wheel
   12:10. Cross-piece of a forward suspension bracket
   12:11. Shock-absorber of a back suspension bracket
   12:12. Lever of a back suspension bracket
   12:13. Springs of a back suspension bracket
   12:14. Stabilizer of cross stability of a back suspension bracket
   12:15. Cross drafts of a back suspension bracket
   12:16. System of adjustment of height of a back suspension bracket
   12:17. Back suspension bracket
   12:18. Cross-piece of a back suspension bracket
   12:19. Fastenings of a cross-piece of a back suspension bracket
   12:20. Nave and bearings of a back wheel
   12:21. Steering wheel
   12:22. Steering column
   12:23. Lock of a steering column / lock of ignition
   12:24. Steering mechanism
   12:25. Steering drafts
   12:26. Steering bipod
   12:27. Pump of system of the hydraulic booster of steering
   12:28. Adjustment of wheels and angles of turns
+ 13. Body
+ 14. Body electric equipment


785173a6

12:24. Steering mechanism

MODELS WITH THE 4-CYLINDER ENGINE

Removal

PERFORMANCE ORDER
1. Establish forward wheels directly.
2. Mark position of the steering lever in relation to the steering mechanism. Turn off a fixing nut and remove the lever from an axis by means of a stripper.
3. Remove the finishing panel under an instrument guard.
4. Turn off a coupling bolt of the lower fastening of a steering column and disconnect a shaft of a steering column from the steering mechanism.
5. Turn off nuts of connections and disconnect hydraulic tubes from the steering mechanism.
6. Turn off fixing bolts and nuts and remove the steering mechanism.

Installation

Installation is carried out to the sequences, the return to removal.

MODELS WITH THE 6-CYLINDER ENGINE

Removal

PERFORMANCE ORDER
1. Establish forward wheels directly.
2. Mark position of the steering lever in relation to the steering mechanism. Turn off a fixing nut and remove the lever from an axis by means of a stripper.
3. Turn off fixing bolts and remove filters from the steering mechanism.
4. Disconnect the socket of connection of the steering mechanism.
5. Remove a damper on the right side of the engine and turn off the nut fixing the right fixing block of the engine to a body.
6. Close the lock of a steering column to prevent rotation of a steering wheel.
7. Disconnect a vacuum hose from the vacuum amplifier of brakes.
8. Release pressure from a power supply system and disconnect fuel tubes from an inlet collector.
9. Remove a tank of cooling liquid.
10. Disconnect hoses from the coal filter.
11. Mark and disconnect hydraulic tubes (are specified by shooters) from the steering mechanism.
12. Remove the finishing panel under an instrument guard.
13. Turn off a coupling bolt of the lower fastening of a steering column and disconnect a shaft of a steering column from the steering mechanism.
14. Install the elevator and raise the right side of the engine approximately on 3 cm.
15. Remove a starter.
16. Turn off fixing bolts (are specified by shooters) and nuts and remove the steering mechanism.

Installation

Installation is carried out to the sequences, the return to removal.