Check of system
| PERFORMANCE ORDER |
| 1. Install the car on a plain surface and start the engine. |
| 2. Measure height of a back suspension bracket. |
| 3. Put heavy freight in a luggage carrier and check that within about 20 seconds height of a suspension bracket returned to initial value – 3–5 cm. |
| 4. Remove freight and check that height of a suspension bracket returned to initial value. |
|
COMPRESSOR
Removal
| PERFORMANCE ORDER |
| 1. Remove an insert of a wheel niche of the right forward wheel. |
| 2. Disconnect the socket of connection of the compressor. |
| 3. Disconnect hoses, turn off fixing screws and remove the compressor. |
|
Installation
Installation is carried out to the sequences, the return to removal.
CONNECTING TUBE
Removal
| PERFORMANCE ORDER |
| 1. Disconnect a tube from the compressor and from valves on shock-absorbers. |
| 2. Disconnect a tube from a tee. |
| 3. Get a tube from fixing clips and remove it from the car. |
|
Installation
Installation is carried out to the sequences, the return to removal.
SENSOR OF HEIGHT OF THE BACK SUSPENSION BRACKET
Removal
| PERFORMANCE ORDER |
| 1. Disconnect the socket of connection of the sensor. |
| 2. Disconnect a connecting link from the spherical hinge on the sensor lever. |
| 3. Turn off fixing screws and remove the sensor. |
|
Installation
Installation is carried out to the sequences, the return to removal. |
